Resetting The System; Using The Touch Screen; G Sensor; Ambient Light Sensor - Polaroid MID1002 User Manual

Make sure the TouchPad does not come into contact with dirt,
n
liquids or grease.
Do not touch the TouchPad if your fingers are dirty.
n
Do not rest heavy objects on the TouchPad or the TouchPad
n
buttons.
You can use the TouchPad with Microsoft Windows as well as non-
Windows applications.
Resetting the System
After installing a software application package, you may be prompted to
reset the system to load the changed operating environment.
To reset the system, or "reboot," press the [Ctrl]+[Alt]+[Delete] keys
simultaneously. This is known as "warm boot." This key combination
acts as "software" reset switch when you encounter hardware or
software problems, which lock up the Intel Classmate PC - Convertible.
If this key combination does not shut down the Intel Classmate PC -
Convertible, you can reset the computer by using the Intel Classmate PC
- Convertible power button. Should the computer lock up for some
reason, pressing this button powers the system off.
Using the Touch Screen
This model display panel also works as a touch screen. You can use the
stylus pen or your thumb to control system operations or as a pen for
writing or illustration applications. When using the computer for the first
time, power on and follow the on screen instructions to active the touch
screen.
force, this may damage the LCD display.
G Sensor
The Hard-Disk Drive (HDD) Protection application protects the system's
HDD from damage caused by sudden harmful shocks. It monitors system
movements that exceed the defined shock threshold. Once a shock is
detected, the application instructs the HDD to temporarily park its
heads which protects against potential damage the drive.
Ambient Light Sensor
Based on a patented dual-diode implementation, the Ambient Light Sensing (ALS)
Never try to tap or write on the screen with excessive
43
Polaroid MID1002
41