Polaroid MID1002 User Manual page 17

inches.
The minimum specification for the flexible cord for Class II product
n
are: (1) 2X0.75 mm
The cord set must have a current capacity of at least 10 A and a
n
nominal voltage rating of 125 / 250 VAC.
Adapter model only.
Manufacturer: Shenzhen Huntkey Electric Co., Ltd.
n
•
Model: HKA03619021-8C (AC 2 Pin)
Manufacturer: ASIAN POWER DEVICES INC
n
•
Model: DA-40A19 (AC 3 Pin)
Battery Pack Safety
The battery pack is intended to use only with this notebook.
n
Only qualified service technicians should replace the battery pack.
n
Do not disassemble the pack.
n
Do not dispose of the battery pack in fire or water.
n
To avoid risk of fire, burns, or damage to your battery pack, does
n
not allow a metal object to touch the battery contacts.
Handle a damaged or leaking battery with extreme care. If you
n
come in contact with the electrolyte, wash the exposed area with
soap and water. If it contacts the eye, flush the eye with water for
15 minutes and seek medical attention.
Do not charge the battery pack if the ambient temperature
n
exceeds 45℃ (113℉).
To obtain a replacement battery, contact your local dealer.
n
Do not expose the battery pack to high storage temperatures
n
(above 60℃, 140℉).
When discarding a battery pack, contact your local waste disposal
n
provider regarding local restrictions on the disposal or recycling of
batteries.
Use only supplied AC Adapter for charging.
n
Only qualified service technicians should replace and discard the
battery pack. Replace only with same or equivalent type recommended
2
conductors, (2) 2-conductor cord.
This model is designed to use with the following AC
Danger of explosion if battery is incorrectly replaced.
17
Polaroid MID1002
13