Using Power Options; Suspend Mode; Standby Suspend; Hibernate Suspend - Polaroid MID1002 User Manual

Using Power Options
Operating System Power Management provides basic power saving
features. In the power configuration dialogue box, you may enter time-
out values for display and hard disk drive.
Operating System power manager saves power by turning off hard drive
after 1 minute of inactivity, for example.
information on how to use Operating System power management
functions. Actual dialogue box shown above may appear slightly
different.
Suspend Mode
Standby Suspend
The system automatically enters this mode after a period of inactivity,
which is set in the Power Scheme dialog box. In Standby mode, hardware
devices, such as display panel and hard disk, are turned off to conserve
energy.
Hibernate Suspend
In this mode, all system data are saved in the hard disk before powering
down. When this mode is activated, all system state and contents are
saved to the hard disk drive after a period of inactivity defined by the
user.
No power or very little power is drawn from the battery module under
this mode.
However, depending on how much RAM that has been installed on your
computer, the amount of time the system requires to restore all its
previous contents can range from five to 20 seconds.
Power Button Action
Intel Classmate PC - Convertible power button can be set to turn off the
system or activate the suspend mode.
.
36
Also consult Operating System user guide for more
39
Polaroid MID1002