Power Cord Requirement - Polaroid MID1002 User Manual

Polaroid MID1002
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
themselves, but should contact the appropriate electric inspection
authority, or an electrician, as appropriate.
Power Cord Requirement
The power cord supplied with the AC adapter should match the plug and
voltage requirements for your local area. Regulatory approval for the AC
adapter has been obtained using the power cord for the local area.
However, if you travel to a different area and need to connect to a
different outlet or voltage, you should use one of the power cords listed
below. To purchase a power cord (including one for a country not listed
below) or a replacement AC adapter, contact your local dealer.
U.S. and Canada
The cord set must be UL/ETL-Listed and CSA-Certified or UL/C-ETL
n
Listed.
The minimum specifications for the flexible cord are (1) No. 18
n
AWG, (2) Type SPT-2, and (3) 2-conductor.
The cord set must have a rated current capacity of at least 7A.
n
The attachment plug must be NEMA 1-15P (7A, 125V)
n
configuration.
Other Countries
The cord set fittings must bear the certification mark of the agency
n
responsible for evaluation in a specific country. Acceptable
agencies are:
Ø
CCC (China)
The flexible cord must be of a HAR (harmonized) type HO5VV-F 3-
n
conductor cord with a minimum conductor size of 0.03 square
12
Users should not attempt to make such connections
16