Spring Preload - BMW C 650 Sport Rider's Manual

Do not twist the handlebar fit-
ting or the handlebars.
WARNING
Adjusting the handbrake
lever while driving.
Accident hazard
Only adjust the handbrake
lever when the Scooter is
stationary.
Turn adjusting screw 1 of the
left handbrake lever or adjust-
ing screw 2 of the right hand-
brake lever into the desired
position.
NOTICE
The adjusting screw can be
turned more easily if you push
the brake lever forward when
doing so.
Adjustment options:
from Position 1: largest dis-
tance between handlebar grip
and brake lever
up to Position 5: smallest dis-
tance between handlebar grip
and brake lever

Spring preload

Setting
It is essential to set spring
preload of the rear suspension
to suit the load carried by the
Maxi­Scooter. Increase spring
preload when the vehicle is
heavily loaded and reduce spring
preload accordingly when the
vehicle is lightly loaded.
Adjusting spring preload
at rear wheel
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
If you want to increase the
spring preload, turn adjusting
ring 1 with the tools from the
onboard toolkit in direction A.
If you want to decrease the
spring preload, turn adjusting
ring 1 with the tools from the
onboard toolkit in direction B.
5
61
z