DeLonghi DEP909P Installation And Service Instructions Use And Care Instructions page 50

Alert code Possible causes
A1
The oven has overheated.
Door lock error: the door
cannot be locked after you
A2
have started a Self Clean
cycle.
Door lock error: the door
cannot be unlocked after
A3
a Self Clean cycle has
finished.
F
Technical fault.
+ number
Should you still require assistance please contact our Customer Service Centre for your
nearest Authorised Delonghi Service Agent.
50
What to do
1. Allow the oven to cool down.
2. If the door is locked, wait until it
automatically unlocks.
3. Once the oven has cooled down and
the door has unlocked, the alert code
will disappear. You can now use the
oven again.
1. Turn the power to the oven off at the
wall and on again.
2. Wait approximately 10 seconds. This
is to allow the door lock to return to its
initial position.
3. Set the clock. See 'Setting the clock
and first use' for instructions.
4. Try starting a Self Clean cycle again,
making sure that you close the door
firmly. See 'Using the Self Clean
function'.
1. Turn the power to the oven off at the
wall and on again.
2. Try pressing on the oven door to help
the door lock disengage.
3. If this doesn't help and the alert
code reappears, call your Authorised
Repairer or Customer Care.
1. Note down the alert code.
2. Wait until the cooling fans have
stopped and the oven has completely
cooled down.
3. Turn the power to the oven off at the
wall.
4. Call your Authorised Repairer or
Customer Care with the alert code
information.