DeLonghi DEP909P Installation And Service Instructions Use And Care Instructions page 48

Problem
Self Clean function
During a Self Clean cycle,
the oven is louder than
usual.
The display shows .
The display shows
the oven door will not open.
At a point during a Self Clean
cycle, the temperature
indicator starts displaying
cascading bars
I have cancelled a Self
Clean cycle but cannot use
the oven:
■
the oven door will not
open
■
the display
counting down minutes
0:00
or showing
■
the Self
function indicator is still
lit
■
the temperature
indicator
cascading bars
■
the dials and buttons
are unresponsive.
The oven is beeping and
the display shows
48
Possible causes
This is normal: the oven's cooling fans operate at their
highest speed.
The door has not been
properly closed.
The oven door is locked
0:00
but
because the oven is still too
hot to be used for cooking.
This is normal: the oven is
in the last phase of the Self
Clean cycle, cooling down.
.
is still
This is normal: the oven is
still too hot to be used for
cooking and needs to cool
Clean
down.
shows
See section 'Alert codes' for instructions.
A2 A3
or .
What to do
Make sure you close the
door properly.
Wait until the Self Clean
cycle has finished. If you
cancelled a Self
cycle which was already
underway, the oven still
needs to cool down before it
can be used. The oven door
will automatically unlock.
Wait until the Self Clean
cycle has finished. A long
tone will sound and the
oven door will automatically
unlock when the oven is
ready to use.
Wait until the cool-down
phase has finished. A long
tone will sound and the
oven door will automatically
unlock when the oven is
ready to use.
Note: depending on when
the Self Clean cycle was
cancelled, the cool-down
phase may take up to 45
minutes.
Clean