Onkyo TX-RZ1100 Basic Manual page 60

> Specifications > Settings
Setting Item Default Value
Network Standby On/Off
Bluetooth Wakeup Off
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear
when the network feature is started.
■ 5� 12V Trigger
Setting Item Default Value
Zone Main
24
> Listening Modes > Playback Function
Setting Details
When this feature is turned "On", you can turn
on the power of the unit via the network using an
application such as Onkyo Remote that can control
this unit.
• When "Network Standby" is used, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum by
automatically entering the HYBRID STANDBY
mode, where only the essential circuit is
operating.
• "Network Standby", which suppresses power
consumption, may be disabled when the
network connection is lost. Use the power
button on the remote controller or main unit to
turn the unit on if this happens.
• Default values vary depending on the regions.
This function wakes up the unit on standby by
connecting a BLUETOOTH enabled device.
"On": Use this function
"Off": Do not use this function
• Setting to "On" increases the power
consumption even when the unit is on standby.
However, the increase in power consumption
is kept to a minimum by automatically entering
the HYBRID STANDBY mode, where only the
essential circuit is operating.
• This setting is fixed to "Off" if "Bluetooth" -
"Auto Input Change" is set to "Off".
Setting Details
Set which zone to output the 12V trigger when
playing. If you select "All", then the 12V trigger is
output to all zones that are playing.
6� Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
■ 1� Zone 2
Setting Item Default Value
Output Level Fixed
Maximum Volume Off
Power On Volume Last
■ 2� Zone 3
Setting Item Default Value
Output Level Fixed
Maximum Volume Off
> Basic Manual
Troubleshooting | Appendix
Setting Details
Select which of the integrated amplifier in a
separate room or this unit should be used to adjust
the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to
"99". (When "3. Audio Adjust" - "Volume" - "Volume
Display" is set to "Absolute")
Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (Volume level
when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" - "Volume" -
"Volume Display" is set to "Absolute")
• You cannot set a higher value than that of
"Maximum Volume".
Setting Details
Select which of the integrated amplifier in a
separate room or this unit should be used to adjust
the volume when Zone 3 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to
"99". (When "3. Audio Adjust" - "Volume" - "Volume
Display" is set to "Absolute")