Dual XDVDN9131 Installation & Owner's Manual page 82

Problem
There is no mobile device connected to the head unit Pair and or connect a mobile device to the head unit as
Bluetooth function is not active on the head unit
Bluetooth function is not active on the mobile device
A mobile device is already connected to the head
unit. This head unit can only be connected to one
device at a time
The time limit for pairing the mobile device has
been reached
The Connect function is set to Manual. When the
Connect function is set to Manual, the head unit will
not connect to any mobile device automatically
Volume is turned down
MUTE function is activated on the head unit
Possible road noise or interior interference
Microphone opening on the front panel is obstructed
Audio is routed to the mobile device
Volume is turned down
Bluetooth MIC is set to external, but no external mic
is connected
3.5mm connector
Auto Answer function is set to On
The calling mobile device is not set to send the
Caller ID or, the service is not available
81
Cause Action
described on page 67
Activate Bluetooth function as described on page
Refer to the owner's manual of your mobile device
Disconnect current mobile device first, then connect
desired mobile device
Pair the mobile device within 60 seconds
Set Connect function to Auto as described on page
Increase the volume during the ringing process
Press MUTE to cancel the mute function and resume
audio
Close all open windows and turn off any fans or A/C
Clear any obstacles in front of microphone opening
Press Transfer to allow audio from the phone to be
heard through the speakers
Increase the volume
Set Bluetooth MIC to internal as described on page 66,
or install and connect external mic as described on
page 7
connector
Set Auto Answer function to Off as described on page
Some devices may not communicate or work properly
with this head unit
66
66
66