Dual XDVDN9131 Installation & Owner's Manual page 81

Problem
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
Speaker wires not connected
One or more speaker wires touching each
other or touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Parking brake safety circuit not connected
Parking brake not applied
Video output is not supported for navigation
mode, SD mode or rear camera input
Reverse circuit not connected
Vehicle is not in reverse
Physical defect in media
Wrong region
Dead battery
Unit is not mounted correctly
Physical defect in media
Focus error
Disc is in upside down
Disc type/content is not compatible
Region code error
Monitor travel path obstructed
Cause
Check connection to ground
Check connections at speakers
Insulate all bare speaker wires from each other and
chassis ground
Check for pinched wire
Check for pinched wire
Use fuses with correct rating
Check connections at parking brake
Apply parking brake as described on page 32
Choose Tuner, Disc, operation of iPod, USB, A/V 1 or
A/V 2 source to display video output
Check connections at reverse lamp
Select reverse gear
Check media for scratches
Use discs labeled "Region 1" or "All" only.
Replace battery
Check mounting sleeve
Check media for scratches
Press
problem persists, press RESET located behind the front
panel as described on page 11.
Use only DVD's labeled "Region 1" or "All" only.
Remove the obstacle and press
Action
to resume the
80