Fiery X3eTY2 65C-KM User Manual page 74

Transmission to the registered destination
– Pressing [Clear All] releases all of the information of the addresses
set.
– For details of the Scanner Setting screen, see p. 2-24.
6
Set the original document.
– For the setting of originals, see p. 2-33.
7
Press [Start].
The original is read and the scanned data is transmitted.
!
Detail
After completion of the operation, press [Reset] on Control Panel in the
Scanner Setting screen and the Select Destinations screen to release the
settings. (Press [Address] to get back to the Select Destinations screen.)
When no resetting is made, the settings are left as they are until copier is
restarted.
Fiery X3eTY2 65C-KM Network Scanner
4
4-11