1. Manuals
  2. Brands
  3. Fiery Manuals
  4. Scanner
  5. X3eTY2 65C-KM
  6. User manual

Fiery X3eTY2 65C-KM User Manual

Hide thumbs Also See for X3eTY2 65C-KM:
Table of Contents

Advertisement

Quick Links

Download this manual
Fiery X3eTY2 65C-KM

Network Scanner

Chapter 1: Introduction
Chapter 2: Overview of the Scanning Features
Chapter 3: Registration of the destination
Chapter 4: Transmission to the registered destination
Chapter 5: Utility Menu
Chapter 6: Troubleshooting
Chapter 7: Appendix

Advertisement

Table of Contents
loading

Related Manuals for Fiery X3eTY2 65C-KM

Summary of Contents for Fiery X3eTY2 65C-KM

  • Page 1: Network Scanner

    Fiery X3eTY2 65C-KM Network Scanner Chapter 1: Introduction Chapter 2: Overview of the Scanning Features Chapter 3: Registration of the destination Chapter 4: Transmission to the registered destination Chapter 5: Utility Menu Chapter 6: Troubleshooting Chapter 7: Appendix...

  • Page 2: Table Of Contents

    Registering a Group ............... 3-13 Change/deletion of the details of the registration ....... 3-16 How to Search ................3-17 Transmission to the registered destination To use the function to register a job ..........4-12 Utility Menu Fiery X3eTY2 65C-KM Network Scanner...
  • Page 3 To set the Title, Text, Reply Address of the E-Mail ....... 5-9 To set the initial value of the setting for scanning ...... 5-12 Troubleshooting Cannot connect to the scanner ............6-1 When an Error Message Appears ........... 6-2 Appendix Glossary ..................... 7-1 Index ....................7-4 Fiery X3eTY2 65C-KM Network Scanner...

  • Page 4: Introduction

    Thank you very much for purchasing the Fiery X3eTY2 65C-KM. This User’s Guide describes the operating procedures and safety precau- tions of the Fiery X3eTY2 65C-KM so that you can handle it safely and make the best of its capabilities. Usually keep this manual close at hand for the convenience of reference later.

  • Page 5: Openssl Statement

    WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Fiery X3eTY2 65C-KM Network Scanner...
  • Page 6 THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI- DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS Fiery X3eTY2 65C-KM Network Scanner...
  • Page 7 The licence and distribution terms for any publically available version or de- rivative of this code cannot be changed. i.e. this code cannot simply be cop- ied and put under another distribution licence [including the GNU Public Licence]. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 8: About This Manual

    Introduction About this Manual This is a user's guide for the network scanner function that employs Fiery X3eTY2 65C-KM. The explanation here is given of the operation of the [SCAN] tab on the con- trol panel. The explanation is also given of the various setting methods of the Network Scanner displayed when pressing [Utility/Counter] on the control panel.

  • Page 9: Manual Composition

    This chapter describes the Utility Menu of the Network Scanner function. Chapter 6 Troubleshooting This chapter describes the major troubleshooting methods of the Network Scanner function. Chapter 7 Appendix The glossary and index regarding the scanning features. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 10: Conventions Used In This Manual

    Microsoft Windows Server 2003: Server 2003 Macintosh OS 8.x - 9.x Mac OS 9 Macintosh OS X v10.2x - v10.4x Mac OS X Above OSs: Windows 98/Me Windows NT4.0/2000 Windows NT/2000/XP/Server 2003 Windows 98/Me/NT/2000/XP/Server 2003 Mac OS 9/X Fiery X3eTY2 65C-KM Network Scanner...

  • Page 11: How To Read This Manual

    Destinations frequently used can be set to [Common]. For details of the Reminder! method for setting the destination to [Common], contact your administra- Explains important notices tor. on operating procedures. Fiery X3eTY2 65C-KM Network Scanner 3-17 This page does not exist in the document. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 12: Overview Of The Scanning Features

    Scanned data is transmitted in the following file format. - Multi Page TIFF - Single Page TIFF - Multi Page PDF - JPEG Original Mail server E-Mail FTP server SMB server QUEUE (Print Job) Hard Disk Print Controller Internet Fiery X3eTY2 65C-KM Network Scanner...
  • Page 13 For details of the network setting, contact your administrator. Scanned data may be destroyed. So, be absolutely sure to maintain the backup of the original. TIFF and JPEG are saved in the form of being rotated 90 degrees coun- terclockwise after scanning. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 14: Flow Of The Operations

    To make a transmission in E-Mail 0 In order to use the Scan to E-mail function, the network setting of the print controller is required in advance. Select [SCAN] tab. Press [E-Mail]. Press [Address Input]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 15 Press [Option Setting] as required to set [Title], [Text] and [Reply Ad- dress] of the E-Mail. – If you want to erase the history of [Option Setting], press [Reset] on Control Panel. – For detail of Option Setting, see p. 5-9. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 16 Pressing [Clear All] releases all of the information of the addresses set. – For details of the Scanner Setting screen, see p. 2-24. Set the original document. – For the setting of originals, see p. 2-33. Press [Start]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 17 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 18 0 It is necessary to access the Web page of the print controller to create a box on the HDD. Select [SCAN] tab. Press [HDD]. Press [Address Input]. Press [Box Name]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 19 Enter in advance in [Box Name] a Box that has been created on the Web page of the print controller. For the method for creating a Box on the Web page, see “User's Guide (Printer)”. Press [OK]. Press [Scan Settings]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 20 For this machine, the maximum allowable attached file size (default: 1000 KB) can be set while in the scan setting. Depending on this setting, the scan data may not be attached to E-Mail, but saved in HDD. In cases like Fiery X3eTY2 65C-KM Network Scanner...
  • Page 21 Overview of the Scanning Features this, download the scan data from the specified location within a fixed period of time. Fiery X3eTY2 65C-KM Network Scanner 2-10...
  • Page 22 If you want to erase the inputs, press [Reset] on Control Panel. However, please note that all of the inputs (except for Proxy set- tings) are erased. – For more information on how to input character, see p. 2-22. Fiery X3eTY2 65C-KM Network Scanner 2-11...
  • Page 23 Be sure to check the address be- fore starting the scanning of an original. – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses set. Fiery X3eTY2 65C-KM Network Scanner 2-12...
  • Page 24 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner 2-13...
  • Page 25 However, please note that all of the inputs are erased. – For more information on how to input character, see p. 2-22. – For details of the setting of the SMB server, see p. 3-10. Fiery X3eTY2 65C-KM Network Scanner 2-14...
  • Page 26 – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses set. – For details of the Scanner Setting screen, see p. 2-24. Fiery X3eTY2 65C-KM Network Scanner 2-15...
  • Page 27 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner 2-16...
  • Page 28 – Press [Address] to return to the Select Destinations screen. – Pressing [Clear All] releases all of the information of the addresses set. – For details of the Scanner Setting screen, see p. 2-24. Fiery X3eTY2 65C-KM Network Scanner 2-17...
  • Page 29 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner 2-18...

  • Page 30: About The Control Panel

    [Start] key Activates various machine operations. [Start] LED Lights in green when machine operation is available, and turns red if any operation cannot be started. [C] (Clear) key Allows resetting of print quantity. Fiery X3eTY2 65C-KM Network Scanner 2-19...
  • Page 31 Note the malfunction code, immediately unplug the machine, and then contact the service representative to inform them of the malfunction code. Fiery X3eTY2 65C-KM Network Scanner 2-20...

  • Page 32: How To Operate The Touch Panel

    Touch a function displayed in a key to select the function. The selected key is highlighted in green. To switch between pages When all items cannot be displayed in a single page, touch lightly the [▼]/[▲] key to switch between pages. Fiery X3eTY2 65C-KM Network Scanner 2-21...

  • Page 33: How To Input Characters

    Cancel This key cancels the characters you input, and the character input screen closes. Shift This key switches between an upper case letter and a lower case letter, and between numbers and signs. Fiery X3eTY2 65C-KM Network Scanner 2-22...
  • Page 34 The followings describe basic steps to input characters on the character in- put screen. Press the corresponding key to input the desired character. Press [OK] key. The character input screen closes. The input characters are displayed on the corresponding column. Fiery X3eTY2 65C-KM Network Scanner 2-23...

  • Page 35: About The Scanner Setting Screen

    Select Destinations screen, thus allowing the destination to be changed. Default Set Pressing this key recalls the initial settings. This key is displayed on the Original Setting screen and the Quality Adjust. screen. Fiery X3eTY2 65C-KM Network Scanner 2-24...
  • Page 36 The color of the scanned data is set. Black Scan is made with 2 colors (2 values) of white and black. Gray Scale The scanning is made in gray scale (in 256-gradation). Full Color The scanning is made in full color. Fiery X3eTY2 65C-KM Network Scanner 2-25...
  • Page 37 Set the Color Space. The setting of the Color Space is available only when [Color] is set to [Full Color]. sRGB Selected when setting sRGB (Standard RGB). Adobe RGB Selected when setting Adobe RGB. Fiery X3eTY2 65C-KM Network Scanner 2-26...
  • Page 38 Sharpness The setting is made in 9 steps from [Smooth] to [Distinct]. Contrast The setting is made in 9 steps from [Weak] to [Strong]. Note No use is available when the color is [Black]. Fiery X3eTY2 65C-KM Network Scanner 2-27...
  • Page 39 A size that can be entered: 100 mm to 303 mm in length, and 140 mm to 438 mm in width. Press [OK] and a size entered on the Size Setting screen is displayed. Press [OK] to return to the Scan Settings screen. Fiery X3eTY2 65C-KM Network Scanner 2-28...
  • Page 40 Press [OK] to return to the Size Setting screen. A size read out is dis- played. Press [OK] to return to the Scan Settings screen. Resolution Set the resolution. Resolution Select the resolution for reading from among [600 dpi], [400 dpi] and [200 dpi]. Fiery X3eTY2 65C-KM Network Scanner 2-29...
  • Page 41 The selection of [File Type] is unavailable for [HDD] and [QUEUE]. TIFF and JPEG are saved in the form of being rotated 90 degrees coun- terclockwise after scanning. Set Number The number of destinations set on the Select Destinations screen is dis- played. Fiery X3eTY2 65C-KM Network Scanner 2-30...
  • Page 42 Check the details of the current setting. – Pressing [Change] after pressing the setting item allows the details of the setting to be changed. – Pressing [Next] displays the details of the setting of the image qual- ity adjustment. Fiery X3eTY2 65C-KM Network Scanner 2-31...
  • Page 43 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner 2-32...

  • Page 44: Setting The Original Document

    ADF of the Copier. Detail For the setting of the original, see “User's Guide (Copy)”. TIFF and JPEG are saved in the form of being rotated 90 degrees coun- terclockwise after scanning. Fiery X3eTY2 65C-KM Network Scanner 2-33...

  • Page 45: Registration Of The Destination

    E-Mail address in advance. The registration is done in the following steps. Registering an E-Mail Address 0 For E-Mail/FTP/HDD/SMB, destinations can be registered as many as 500 in sum. Select [SCAN] tab. Press [E-Mail]. Press [Register/Edit]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 46 [Register Name] entered here is displayed in the Select Destina- tions screen. – The Search Character is used as a search key word when searching a destination. For details of the method for setting the Search Char- acter to [Common], contact your administrator. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 47 The destination registered is displayed. Detail When a transmission is made to the registered destination, select a cor- responding destination in the Select Destinations screen. For details, see “Transmission to the registered destination” on page 4-1. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 48: Registering The Hard Disk

    The registration is done in the following steps. Registering the Hard Disk 0 For E-Mail/FTP/HDD/SMB, destinations can be registered as many as 500 in sum. Select [SCAN] tab. Press [HDD]. Press [Register/Edit]. Press [Add]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 49 [Register Name] entered here is displayed in the Select Destina- tions screen. – The Search Character is used as a search key word when searching a destination. For details of the method for setting the Search Char- acter to [Common], contact your administrator. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 50 The destination registered is displayed. Detail When a transmission is made to the registered destination, select a cor- responding destination in the Select Destinations screen. For details, see “Transmission to the registered destination” on page 4-1. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 51: Registering The Ftp Server

    FTP server. The registration is done in the following steps. Registering the FTP server 0 For E-Mail/FTP/HDD/SMB, destinations can be registered as many as 500 in sum. Select [SCAN] tab. Press [FTP]. Press [Register/Edit]. Press [Add]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 52 – Port No.: The Port No. cannot be changed. – Proxy: When the Proxy server is used, a setting is made to [ON]. – For more information on how to input character, see p. 2-22. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 53 The destination registered is displayed. Detail When a transmission is made to the registered destination, select a cor- responding destination in the Select Destinations screen. For details, see “Transmission to the registered destination” on page 4-1. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 54: Registering The Smb Server

    SMB server. The registration is done in the following steps. Registering the SMB server 0 For E-Mail/FTP/HDD/SMB, destinations can be registered as many as 500 in sum. Select [SCAN] tab. Press [SMB]. Press [Register/Edit]. Press [Add]. Fiery X3eTY2 65C-KM Network Scanner 3-10...
  • Page 55 – Password: Input a Password for the SMB server. “*”s are displayed according to the number of characters you input. – For more information on how to input character, see p. 2-22. Fiery X3eTY2 65C-KM Network Scanner 3-11...
  • Page 56 The destination registered is displayed. Detail When a transmission is made to the registered destination, select a cor- responding destination in the Select Destinations screen. For details, see “Transmission to the registered destination” on page 4-1. Fiery X3eTY2 65C-KM Network Scanner 3-12...

  • Page 57: Registering A Group

    Group. The registration is done in the fol- lowing steps. Registering the Group 0 At maximum, 100 groups can be registered. Select [SCAN] tab. Press [Group]. Press [Register/Edit]. Press [Add]. Fiery X3eTY2 65C-KM Network Scanner 3-13...
  • Page 58 For more information on how to input character, see p. 2-22. Select a destination you want to register in each group from among [E- Mail], [HDD], [FTP] and [SMB], and then press [OK]. Press [Return]. The group registered is displayed. Fiery X3eTY2 65C-KM Network Scanner 3-14...
  • Page 59 [OK]. Detail When a transmission is made to the registered group, select a corre- sponding group in the Select Destinations screen. For details, see “Transmission to the registered destination” on page 4-1. Fiery X3eTY2 65C-KM Network Scanner 3-15...

  • Page 60: Change/Deletion Of The Details Of The Registration

    The details of the registration are changed. When deleting the registered destination, select a destination and press [Delete]. – When the message screen is displayed, press [Yes]. The details of the registration are deleted. Press [Return]. Fiery X3eTY2 65C-KM Network Scanner 3-16...

  • Page 61: How To Search

    There are [A] to [Z], [Others] and [Common] available for the Search Char- acter. Destinations frequently used can be set to [Common]. For details of the method for setting the destination to [Common], contact your administra- tor. Fiery X3eTY2 65C-KM Network Scanner 3-17...
  • Page 62 Destinations screen in which there is a destination you want to search. Press [Search]. When searching [E-Mail], select [Normal Search]. – If you want to reset the search results, press [Reset] on Control Panel. Fiery X3eTY2 65C-KM Network Scanner 3-18...
  • Page 63 Enter the Search Character and then press [OK]. The corresponding destination is displayed. Detail For more information on how to input character, see p. 2-22. If you want to reset the search results, press [Reset] on Control Panel Fiery X3eTY2 65C-KM Network Scanner 3-19...

  • Page 64: Transmission To The Registered Destination

    For details of the method for searching a registered destination, see p. 3-17. Select the destination. Press [Option Setting] as required to set [Title], [Text] and [Reply Ad- dress] of the E-Mail. – For detail of Option Setting, see p. 5-9. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 65 For details of the Scanner Setting screen, see p. 2-24. Set the original document. – For the setting of originals, see p. 2-33. Press [Start]. The original is read and the scanned data is transmitted. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 66 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 67 Use the Search Character of a destination to which you want to make a transmission or the Search function to display the destination. – For details of the method for searching a registered destination, see p. 3-17. Select the destination. Press [Scan Settings]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 68 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 69 Use the Search Character of a destination to which you want to make a transmission or the Search function to display the destination. – For details of the method for searching a registered destination, see p. 3-17. Select the destination. Press [Scan Settings]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 70 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 71 Use the Search Character of a destination to which you want to make a transmission or the Search function to display the destination. – For details of the method for searching a registered destination, see p. 3-17. Select the destination. Press [Scan Settings]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 72 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 73 Select Group which you want to make a transmission. – When checking the list of destinations registered in the group, press [List]. Press [Scan Settings]. Make a setting for scanning. – Press [Address] to return to the Select Destinations screen. Fiery X3eTY2 65C-KM Network Scanner 4-10...
  • Page 74 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner 4-11...

  • Page 75: To Use The Function To Register A Job

    Select a destination to be registered as a job and make a setting for reading. Press [Mode Memory]. Mode Memory Mode Memory Press [Store]. – Pressing [Pre-Job Recall] allows the details of the preceding job to be recalled. Fiery X3eTY2 65C-KM Network Scanner 4-12...
  • Page 76 Transmission to the registered destination Check the details of the setting and press [OK]. Press the job No. you want to register and then press [OK]. Fiery X3eTY2 65C-KM Network Scanner 4-13...
  • Page 77 Check the job to see if it has been registered and then press [OK]. – With a job selected, pressing [Job Check] allows the details of the job to be checked. The Scanner Setting screen will be restored. Fiery X3eTY2 65C-KM Network Scanner 4-14...
  • Page 78 Pressing [Clear All] releases all of the information of the addresses set. Check the details of the setting for reading. Set the original document. – For the setting of originals, see p. 2-33. Press [Start]. Fiery X3eTY2 65C-KM Network Scanner 4-15...
  • Page 79 Scanner Setting screen and the Select Destinations screen to release the settings. (Press [Address] to get back to the Select Destinations screen.) When no resetting is made, the settings are left as they are until copier is restarted. Fiery X3eTY2 65C-KM Network Scanner 4-16...

  • Page 80: Utility Menu

    - Setting of the Text of the E-Mail - Setting of the initial value of the setting for reading Entering Utility Menu Press [Utility/Counter] on the control panel. Utility/ Utility/ Counter Counter Utility Menu screen appears. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 81 Utility Menu Exiting Utility Menu Press [Exit] on the Utility Menu screen. Utility Menu screen is closed. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 82: Address Edit

    Utility Menu Address Edit The destination of the scanned data can be added/changed/deleted. Press [Utility/Counter] on the control panel. Press [01 Scan Send Address]. Press [01 Address Edit]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 83 The method for registering, editing and deleting a destination is the same as the operation made from the Select Destinations screen. For details, see “Registration of the destination” on page 3-1. Press [Return] and then press [Exit]. Utility Menu screen is closed. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 84: E-Mail Title Setting

    Select Destinations screen of the E-Mail. 0 The registration of up to 5 E-Mail Titles is available. Press [Utility/Counter] on the control panel. Press [01 Scan Send Address]. Press [02 E-Mail Title Setting]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 85 Press the number of the Title of the E-Mail that you want to register. Enter the Title of E-Mail and then press [OK]. The Title of the E-Mail is registered. Press [OK] and then press [Exit]. Utility Menu screen is closed. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 86: E-Mail Text Setting

    Select Destinations screen of the E-Mail. 0 The registration of up to 5 E-Mail Text is available. Press [Utility/Counter] on the control panel. Press [01 Scan Send Address]. Press [03 E-Mail Text Setting]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 87 Press the number of the Text of the E-Mail that you want to register. Enter the Text of E-Mail and then press [OK]. The Text of the E-Mail is registered. Press [OK] and then press [Exit]. Utility Menu screen is closed. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 88: To Set The Title, Text, Reply Address Of The E-Mail

    To set the Title, Text, Reply Address of the E-Mail The Title and the Text of the E-Mail registered in the Utility Menu can be se- lected while in the transmission. Press [SCAN] tab. Press [E-Mail]. Set the destination. Press [Option Setting]. Press [Title]. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 89 When setting a Reply address, press [Reply Address]. When [Reply Address] is pressed, select a reply address on the screen displayed or press [Address Input] to enter an address of the Reply address, and then press [OK] twice. Fiery X3eTY2 65C-KM Network Scanner 5-10...
  • Page 90 [Option Setting] screen and the [Address Input] screen to release the set- tings. (Press [Address] to get back to the address selection screen.) When no resetting is made, the settings are left as they are until they are restarted. Fiery X3eTY2 65C-KM Network Scanner 5-11...

  • Page 91: To Set The Initial Value Of The Setting For Scanning

    Set the initial value of the Select Destinations screen or the Scanner Setting screen. To set the initial values of the File Type and Select Destinations screen Press [Utility/Counter] on the control panel. Press [02 User Setting]. Press [05 Scan Setting]. Fiery X3eTY2 65C-KM Network Scanner 5-12...
  • Page 92 Compress Method Color/Gray: Select the compression method while in the color/gray scale from among [High Compress], [Standard] and [Low Compress]. Press [OK]. The initial value is set. Press [Exit]. Utility Menu screen is closed. Fiery X3eTY2 65C-KM Network Scanner 5-13...
  • Page 93 Utility Menu To set the initial value of the Scanner Setting screen Press [Utility/Counter] on the control panel. Press [02 User Setting]. Press [02 Initial Setting]. Fiery X3eTY2 65C-KM Network Scanner 5-14...
  • Page 94 Setting the ADF to ON in the Scan Default Setting screen allows the 2-Sided to be set in the Scanner Setting screen. – For details of other setting functions for scanning, see p. 2-24. Press [OK]. Press [Exit] to close Utility Menu. Fiery X3eTY2 65C-KM Network Scanner 5-15...

  • Page 95: Troubleshooting

    Trace the routing to the scanner to check whether there are any error conditions within the network. If any error conditions are found, eliminate them. If no error is found and yet the connection to the scanner cannot be established, contact your service representative. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 96: When An Error Message Appears

    Reducing the number of originals to be scanned or lowering the level of [Resolution] allows the amount of memory used to be reduced. However, please note that when the level of [Resolution] is lowered, the image qual- ity may be deteriorated. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 97: Glossary

    A string attached to a file name to distinguish the file saving method. Denoted following a period like “.bmp”, “.hog”, etc. Abbreviation of File Transfer Protocol. A protocol used to transfer files on the TCP/IP network such as Internet, Intranet, etc. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 98 POP3, version 3 of POP, is mainly used. Port number Number to distinguish each communication port of multiple processes working in the computers on the network. A same port cannot be used for multiple processes. Fiery X3eTY2 65C-KM Network Scanner...
  • Page 99 To use devices supporting TWAIN, a TWAIN driver is required. Web browser Software to access web pages. Internet Explorer, Netscape Navigator, etc. are examples. Fiery X3eTY2 65C-KM Network Scanner...

  • Page 100: Index

    Multi Page TIFF ........ 2-1 QUEUE ........... 2-17 Registering an E-Mail Address ..3-1 Registering the FTP server ....3-7 Registering the Hard Disk ....3-4 Registering the SMB server ... 3-10 Scanner Setting Screen ....2-24 Fiery X3eTY2 65C-KM Network Scanner...
  • Page 101 2006.9 Copyright Fiery_X3eTY2_65C_KM_E_v10 2006...

Table of Contents