• This set can be disassembled in the order shown below.
Set
Cabinet (Upper) Section
Note: Follow the disassembly procedure in the numerical order given.
CABINET (UPPER) SECTION
3 screw (B2)
2 Open the upper lid sub assy.
Note on installation cabinet (upper) section:
When installing cabinet (upper) section,
adjust the S805 and knob (AVLS).
SECTION 3
DISASSEMBLY
Cabinet (Upper) Sub Assy, "Lid Sub Assy, Upper" (E888/EJ825 Model)
Cabinet (Upper) Sub Assy, "Lid Sub Assy, Upper" (E999/EJ925 Model)
Main Board, Optical Pick-Up Section (CDM-3021EBG)
Setting The Battery Terminal Board (Relay) Lead Wire And
Motor Lead Wires
4 five screws (B2)
5 claw
knob (AVLS)
S805
– 7 –
5 three claws
6 cabinet (upper) section
5 two claws
7 spring (open)
1 two screws (B2)