D-Link DSL-2540U User Manual page 60

DSL-2540U ADSL/Ethernet Router with Built-in Switch
User Manual
You can specify the following parameters:
Parameter
Name
LANs
WANs
Click the Save button.
!
When you add an interface to the new group, it is excluded from the group to which it has
been assigned before.
To edit or remove an existing group, select the relevant group on the Advanced / Interface
grouping page. On the page displayed, change the parameters and click the Save button, or click
the Delete button. When you delete a group, interfaces assigned to it are reassigned to the
DEFAULT group.
Figure 55. The page for adding a new group of ports.
A name for the group for easier identification. You can specify any
name.
The list of available internal interfaces is displayed in the left
column of the line.
Use the button ==> to select interfaces. The selected interfaces will
be displayed in the right column of the field.
WAN connections to which the new group will be assigned. WAN
connections of PPPoA and IPoA type cannot be added to groups.
Use the button ==> to select WAN connections. The selected
connections will be displayed in the right column of the field.
Page 60 of 86
Configuring via Web-based Interface
Description