Scanning For Tv Channels (Dvb-T) - LifeView FlyDVB Trio User Manual

LifeView DTV

4.3 Scanning for TV Channels (DVB-T)

Before you can watch DVB-T
digital TV, you have to scan for
available channels in your area.
First, select DVB-T as your
source. On the Menu Bar, click
on Tool, then click on Scan.
You can also click on the Scan
button on the left side of the
screen.
Receiving Setup:
This shows the current reception standards the DTV application is set to.
Services Information:
This shows information about the currently selected channel when available. During a
scan, this will show information on the status of the scan
Channel Scan:
There are two ways to scan for available channels, Auto Scan and Transponder Scan.
1. Auto Scan:
Select Auto Scan, then select your country
from the drop-down box and click Scan.
2. Transponder Scan:
If you want to manually enter a frequency,
select Transponder Scan, type in the
Frequency in kHz and click Scan.
11