Miele PT 5137 WP Installations Plan page 11

PT 5137/7137
Plinth installation
The machine can be installed on a machine plinth (open or box plinth,
available as an optional Miele accessory) or on a concrete platform to
be provided on site.
The quality of the concrete and its strength must be assessed
according to the machine load. Ensure that any raised concrete plinth
is adequately bonded to the concrete floor below!
If the machine is installed on a concrete or masonry plinth, it must be
secured using the anchors supplied with the machine. Otherwise there
10 145 620 / 01
is the danger of the machine moving and falling off the plinth during
spinning.
Washer-dryer stack
A Miele tumble dryer can be stacked on top of the washer-extractor. A
WTV stacking kit (optional accessory) is required for this.
Installation of the stacking kit must be performed by Miele Service or
an authorised agent.
en - GB
11