Table of Contents
Advertisement
X830_EN_Book.book Page 7 Wednesday, May 26, 2010 8:56 AM
Connecting your Phone to the PC
1
Connect your phone to the PC using the
supplied USB cable or through the Bluetooth.
2
When using the USB cable for connection,
select COM port on your phone.
3
On your PC, double click the MobilePhoneTools
icon, then the connected icon is displayed.
Customize your phone
Customize your phone to match your preferences.
Set time & date
1
Check that your phone is turned on. Enter the
PIN code if required.
2
On the home screen, go to
>
Settings
General
>
Time & date
.
3
Select
/
: tap on icon
Set time
Set date
until you reach the desired digits.
Note:
•
The PIN code is preconfigured and communicated to
you by your network operator or retailer.
•
If you enter an incorrect PIN code three times in
succession, your SIM card will be blocked. To unblock it,
you must request the PUK code from your operator.
•
If you enter an incorrect PUK code ten times in
succession, the SIM card will be locked permanently.
When this happens, please contact your network
operator or retailer.
Profiles
The profiles are defined for several scenes. They
consist of the settings for ringtones, volume, and
others. With preset profiles, you can easily adjust
the settings for incoming calls and messages as
desired.
>
1
to activate the
Go to
Profiles
, tap on
Activate
profile.
or
2
Tap on
Modify
to modify ringtones, volume and
others.
Note:
If you select Flight mode, you disable the connection
between your phone and your mobile phone network.
Getting started 7
Advertisement
Table of Contents
