Planet WNRT-625 User Manual page 29

Wireless broadband router

Hide thumbs Also See for WNRT-625:

Table of Contents

Fragment Threshold: This is the maximum data fragment size (between 256 bytes and 2346

bytes) that can be sent in the wireless network before the router fragments the packet into smaller

data frames. The default value is 2346.

RTS Threshold: Request to send (RTS) is designed to prevent collisions due to hidden node. A

RTS defines the biggest size data frame you can send before a RTS handshake invoked. The

RTS threshold value is between 1 and 2347. The default value is 2347.

If the RTS threshold value is greater than the fragment threshold value, the RTS handshake

does not occur. Because the data frames are fragmented before they reach the RTS size.

Tx Power: The Tx Power range is between 1 and 100. The default value is 100.

Short Preamble: Select Disable or Enable.

Short Slot: Select Disable or Enable.

Tx Burst: Select Disable or Enable.

Pkt_Aggregate: Select Disable or Enable.

Country Code: Select the region which area you are. It provides six regions in the drop-down list.

Wi-Fi Multimedia

WMM Capable: Enable or disable WMM.

APSD Capable: Enable or disable APSD.

WMM Parameter: Click WMM Configuration button to pop up WMM Parameters of Access Point

page. You can configure WMM parameters in the page.

Multicast-to-Unicast Converter

Multicast-to-Unicast Converter: Enable or disable Multicast-to-Unicast Converter.

After finishing the settings above, click Apply to save the settings and make the new configuration take

effect. Click Cancel to close without saving.

Table of Contents