Planet WNRT-625 User Manual page 18

PPPoE Mode
User Name: User name of PPPoE account
Password: Password of PPPoE account
Verify Password: Enter the password of PPPoE account again.
Operation Mode: It provides two types of operation modes.
Keep Alive means keeping on-line mode. You can set the redial period in the field. When the
redial period expires, AP will execute dial-up again to keep online.
On Demand means executing dial-up on demand. Within the preset idle time, if AP does not
detect the flow of the user continuously, AP automatically stops the PPPOE connection.
Once it detects the flow (e.g., accessing a webpage), the router restarts the PPPOE dial-up.
MAC Clone
Enabled: Enable or disable.
After finishing setting, click Apply to save the settings and make the new configuration take effect.
Click Cancel to close without saving.
L2TP
Select L2TP in the WAN Connection Type drop-down list and the following page appears. There are
two address modes: Static and Dynamic.
1. If you select Static in the Address Mode field, the page shown in the following figure appears.
18