Read Before Installing; Clearance; Gas Connection; Dimensions - Market Forge Industries 2-HPGR Owner's Manual

READ BEFORE INSTALLING

Clearance:

When installing against combustible surfaces (side walls) is 3" (76mm) and (rear walls) is 6" (152mm)
clearance is required. When installing against non-combustible surfaces (rear or side walls) 0" clearance
is required.
If equipment is to be installed where the elevation exceeds 2000'609.6 meters above sea level, specify
installation altitude so that proper orifices can be provided.

Gas Connection:

60,000 Total BTU
3/4" NPT (19mm) on the right hand rear of the appliance. The pressure regulator (supplied) is to be
connected here by the installer. Manifold gas pressure from regulator to gas valve shall be 5" W.C. for
natural and 10" W.C. for LP gas. Incoming gas pressure must not exceed 12" W.C.

Dimensions:

INSTALLATION

□
Natural Gas
□
Propane Gas (LP)
CSA & CSA Certified. NSF Standards.
3