Advertisement
How to Install
Keep a firm grip on the air conditioner, carefully place the unit into the window opening so the bottom of the air
conditioner frame is against the window sill (FIG. 6A & FIG. 6B). Carefully close the window behind the top rail
of the unit.
FIG. 6A
INSIDE
Extend the side panels out against the window frame (FIG. 7A for wooden windows), (FIG. 7B for Vinyl-Clad
windows).
FIG. 7A
Place the frame lock between the frame extensions and the window sill as shown (FIG. 8A for wooden
windows), (FIG. 8B for Vinyl-Clad windows).
FIG. 8A
wooden windows:
Drive locking screws:
A: For wooden windows:
Drive 1/2 (12.7 mm) locking screws through the frame lock and into the sill (FIG. 9A). NOTE:To prevent
window sill from splitting, drill 1/8 (3mm) pilot holes before driving screws. Drive 1/2 (12.7 mm) locking
screws through frame holes into window sash (FIG. 9B).
B: For Vinyl-Clad windows:
Drive 1/2 (12.7 mm) locking screws through the frame lock and into the window sash (FIG. 9B). NOTE:
Before driving the screws, use a drill to drill 5 holes through the holes in the frame lock and frame extensions
into the windows sash as shown ( FIG. 9B).
FIG. 9A
OUTSIDE
Wooden Windows
window
frame
Installation
FIG. 6B
INSIDE
FIG. 7B
FIG. 8B
Vinyl-Clad windows:
FIG. 9B
OUTSIDE
Vinyl-Clad Windows
3
Advertisement
