Ceiling Installation - Optoma EX520 User Manual

Appendices

Ceiling Installation

To prevent damage to your projector please use the recommended
mounting package for installation.
To ensure compliance, only use a UL Listed ceiling mount and
Damage to the
v
screws that meet the following specifications:
projector as a
result of
4
incorrect
4
installation
4
voids the
Refer to the following diagram to ceiling mount the projector.
warranty.
Ensure at least
v
10cm clearance
between the
ceiling and the
underside of
the projector.
Avoid locating
v
the projector
near heat
sources such as
air conditioning
and heaters.
Excess heat
may cause the
projector to
power off.
English

Screw Type: M4
Maximum screw length: 10 mm
Minimum screw length: 7.5 mm
106 cm (3.7 ft.)
42 cm (1.3 ft.)
238 cm (7.8 ft.)