Changing The Gw-Bac1 Ip Address; Connect The Pc To Gw-Bac1 Via The Ethernet Port; Figure 27: Ethernet Port Location; Figure 28: Pc Ip Configuration - Unitronics GW-BAC1 User Manual

Unitronics's BACnet Gateway User Guide
4

CHANGING THE GW-BAC1 IP ADDRESS

4.1

Connect the PC to GW-BAC1 via the Ethernet Port


Connect a standard CAT5 Ethernet cable (Straight through or Cross-Over) between the PC and GW-BAC1

The Default IP Address of GW-BAC1 is 192.168.1.24, Subnet Mask is 255.255.255.0. If the PC and GW-BAC1
are on different IP Networks, assign a static IP Address to the PC on the 192.168.1.xxx network

Go to

Right-click on Local Area Connection > Properties

Highlight

Select: Use the following IP address

Click
Unitronics

Figure 27: Ethernet Port Location

> >
>
twice

Figure 28: PC IP configuration

Ethernet
Port
Page 21 of 28