Suitable Cables For Power Supply And Ethernet - Siemens W786C Operating Instructions Manual

Connection

6.2 Suitable cables for power supply and Ethernet

6.2 Suitable cables for power supply and Ethernet
Cable specification
The following table lists the requirements for a cable depending on the use case.
Application
Direct 24 V DC supply
Power supply adapter 12 to 24 VDC
Power supply adapter 100 to 240 VAC
Ethernet
Fiber-optic cable multimode
(for device variants with optical connectors)
36
Specification
Round cable cross-section with
•
6 to 8 mm diameter.
Two-wire cable with 0.5 to 1.5 mm
per wire.
Permitted tensile load at least
•
100 N.
UL listing: Type PLTC or ITC
•
Round cable cross-section with
•
6 to 8 mm diameter.
Two-wire cable with 0.5 to 1.5 mm
per wire.
Permitted tensile load at least
•
100 N.
UL listing: Type PLTC or ITC
•
Round cable cross-section with
•
6 to 8 mm diameter.
Three-core cable with 0.5 - 1.5 mm
•
tion of the individual cores.
Permitted tensile load at least
•
100 N.
1. IE FC TP standard cable GP 2 x 2 (type A)
Order no.: 6XV1 840-2AH10
2. IE TP torsion cable 2 x 2 (type C)
Order no.: 6XV1 870-2F
3. IE FC TP trailing cable 2 x 2 (type C)
Order no.: 6XV1 840 3AH10
UL listing: Type PLTC or ITC (the three named types
have this approval)
FO standard cable GP
order no. 6XV1 873-2A
Minimum bending radius 65 mm.
You will find detailed information on preassembled
cable lengths in the "Catalog IK PI".
FO Robust Cable GP 2G50/125/900
Order no. 6XV1873-2R
Halogen-free, UV-resistant cable for indoors and
outdoors for ambient temperatures -40 °C ... +70 °C.
Operating Instructions, 10/2015, A5E03692138-07
cross-section
2
cross-section
2
cross sec-
2
SCALANCE W786C