Fitting/Removing The Scalance W786 To/From A Mounting Plate - Siemens W786C Operating Instructions Manual

Mounting
5.5 Installation with mounting plate
5.5.6

Fitting/removing the SCALANCE W786 to/from a mounting plate

Procedure for mounting the device
Figure 5-12
Follow the steps below to fit a SCALANCE W786 to a mounting plate:
1. Lead the cables into the housing of the SCALANCE W786 (position A in the figure
above). Note the information in the section "Connecting up cables".
2. Fit the SCALANCE W786 so that the upper edge of the rear of the housing is below the
two catches of the mounting plate (position B in the figure above).
28
Fitting the SCALANCE W786 to a mounting plate
Operating Instructions, 10/2015, A5E03692138-07
SCALANCE W786C