Autoboil Mode - Panasonic KY-B615AB Operating & Installation Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

IH Cooking

Autoboil Mode

NOTE
NOTE
Min. 0.5 L / 1 L
20
EN
Available on the cooking zone with
1. Touch and hold the main power key to turn on
the power.
2. Select the cooking zone with
large cookware, the whole flex cooking zone can
also be selected by touching either front or rear
cooking zone selector twice.
3. Touch Autoboil key. The appliance beeps 5 times
when the water reaches boiling point and maintains
a rolling boil. After beeping add ingredients and
adjust the heating power with the slider as required.
Temperature '100' will flash in the display until the
boiling temperature is reached. After the water is
boiled, the appliance automatically sets the power
level to "7". Increase or decrease the power level as
required.
4. Touch and hold the key of the cooking zone or
set the power level to "OFF" to turn off.
Cookware with a non-stick coating may affect the sensor detection.
After beeping, adjust the power level as required.
Cooking Timer can be used with Autoboil Mode. (See page 25)
Autoboil Mode is developed for boiling water only.
To achieve the optimum performance, the following is
recommended.
Use a lid until boiling.
Use a minimum of 0.5 L of water. If a larger pan
that covers 3 or more areas of flex cooking zone,
use a minimum of 1 L of water.
Minimum 1 cm of depth when flex cooking zone is
used.
In order to prevent water boiling over from the pan, the
following is recommended.
No more than 70% pan capacity should be used.
There should be a minimum gap of 3 cm between
the lid and the water surface.
.
. For

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ky-r615abKy-b625gb

Table of Contents