Samsung Galaxy S III User Manual page 230

WPS PIN Entry
If a WPS Push Button does not work, there is an alternative
WPS connection method where you would use a device
generated PIN number to establish the connection. This
number is then entered into your WAP's WPS client PIN field
to complete the connection.
To pair your device using WPS PIN:
1. From the main Settings page, tap Connections tab
Wi-Fi.
2. Press then tap WPS PIN entry.
3. Write down the generate PIN number and enter it into
your Wi-Fi Router's client PIN field.
4. Once the connection is complete, confirm the external
router now appears in the Wi-Fi list as connected.
223
Wi-Fi Direct Setup and Settings
You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
direct communication. This connection is direct and not via a
HotSpot or WAP.
Displays when Wi-Fi Direct is active and
communicating
Note: Activating this feature will disconnect your current Wi-Fi
network connection.
To activate your connection:
1. From the main Settings page, tap Connections tab.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on. The slider color indicates the
activation status.
3. Tap Wi-Fi Direct.