Advertisement
TOOL
KIT
2 double-ended box spanners (11- 14and 21 .22
mm); I double open-ended spanner (8, 14
mm); I single open-ended spanner (J mm);
I
screwdriver.
These tools are contained in a canvas roll
which is placed in the left wing together with
this booklet.
OPERATION
For fuel
mixture
to be used both
during
and after
running-in,
see chart
on page 30.
We recommend
to use good quality, standard
grade Petrol, and to mix it with oil thoroughly.
Keep the breather on filling cap clean.
Running-in.
Important
rules to be followed
while running-in
1200
miles:
-
Do not exceed following speeds:
Ist gear
9.5 m.p.h.
2nd gear
19 m.p.h.
3rd gear
31 m.p.h.
-
Do not hold these max. speeds for long
periods neither
use full
throttle
opening
up-hill.
-
Change 011in the gear box and check that
nuts and bolts are not slack after the first
600 miles.
Starting
the engine.
Seeon Fig. 7 the three
positions of the tap: on, off, reserve.
Open the fuel tap, put the gear box In neutral
(see "0",
Fig. 13) and the throttle
In slow
running position, then depress the starting
lever.
-
17
--- --
Advertisement
