Toyota FJ CRUISER 2013 Maintenance Manual page 48

Maintenance Log
65,000 miles or 78 months
Check installation of driver's floor mat
Inspect and adjust all fluid levels
Rotate tires
Visually inspect brake linings/drums and
brake pads/discs
Note: If 0W-20 oil WAS NOT used at
the last oil change, replace engine oil
1
and oil filter.
Additional Maintenance Items for
Special Operating Conditions
Driving on dirt roads or dusty roads:
Inspect ball joints and dust covers
Inspect drive shaft boots (4WD)
Inspect engine air filter
Inspect steering linkage and boots
Lubricate propeller shaft
Re-torque propeller shaft bolt
Replace engine oil and oil filter
Tighten nuts and bolts on chassis and
body
Driving while towing, using a car-top
carrier, or heavy vehicle loading
Lubricate propeller shaft
Re-torque propeller shaft bolt
Replace engine oil and oil filter
Tighten nuts and bolts on chassis and
body
Repeated trips of less than five miles in
temperatures below 32°F / 0°C:
Replace engine oil and oil filter
Extensive idling and/or low speed driving
for a long distance such as police, taxi or
door-to-door delivery use:
Replace engine oil and oil filter
D S V
EALER ERVICE ERIFICATION
D :
ATE
M :
ILEAGE
46
Maintenance Log
2
3
3
1
5
:
3
3
1
1
1
:
70,000 miles or 84 months
Check installation of driver's floor mat
Inspect and adjust all fluid levels
Replace engine oil and oil filter
Rotate tires
Visually inspect brake linings/drums and
brake pads/discs
Additional Maintenance Items for
Special Operating Conditions
Driving on dirt roads or dusty roads:
Inspect ball joints and dust covers
Inspect drive shaft boots (4WD)
Inspect engine air filter
Inspect steering linkage and boots
Lubricate propeller shaft
Re-torque propeller shaft bolt
Tighten nuts and bolts on chassis and
body
Driving while towing, using a car-top
carrier, or heavy vehicle loading
Lubricate propeller shaft
Re-torque propeller shaft bolt
Tighten nuts and bolts on chassis and
body
D S V
EALER ERVICE ERIFICATION
D :
ATE
M :
ILEAGE
1
2
3
3
5
:
3
3
: