Bosch WFL 2090 Operating, Care And Installation Instructions Manual page 34

To reduce the risk of fire or electricalshock,
DONOT use an extensioncord or an adapter to
connect the washer to the electricalpower
supply.
Inthe event that a ground-fault circuit breaker is
to be used, only use types marked with the
following symbol: IZ_.
Only this symbol can guaranteecompliance with all
current regulations.
Do not insert/removethe power cord with wet or
damp hands.
Handlethe plug body only when removingthe plug
from the socket.
Transport, e.g. when moving
Before transporting the washing machine:
- Turn off the water,
- Release the water pressure in the supply hose
(refer to page 22),
- Drain any remaining water (refer to page 20),
- Disconnect the washing machine from the
electrical outlet.
- Dismantle the supply and drainage hose,
- Install all transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the Drain
program to run through before starting the first
wash program.
Preparing and inserting the transport bolts
Remove the covers.
I_ Insert all 4 transport bolts and clamp the power
cord to the holders. Tighten the bolts.
34