Maintenance - Makita BDF460 Instruction Manual

MAINTENANCE
CAUTIO N :
Always be sure that the
tool
is switched
off
and the battery cartridge
is
removed before
attempting to perform inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both
carbon brushes should be replaced at
the same time. Use only identical carbon
brushes.
Limit mark
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
Brush
ho\der cap
To maintain product SAFETY and RELIABILITY, repairs, maintenance
or
adjustment should
be performed by Makita Authorized or Factory Service Centers, always using Makita
replacement parts.
15