Installation Site; Building Under A Continous Worktop / In A Kitchen Run - Miele T 4859 Ci SUPERTRONIC Operating Instructions Manual

Installation site

,
Make sure the dryer door can be
opened without hindrance after
installation.
Building under a continous worktop /
in a kitchen run
This tumble dryer is specially designed
for installation under a continuous
worktop run in a fitted kitchen.
N = Niche height (820-930 mm)
When moving the dryer do not lift it
by the drum door.
The dryer is supplied fitted with a
cover plate instead of a machine lid.
The cover plate is necessary to
ensure electrical safety and must
not be removed.
Installation and connection
– Slides* can be used to protect the
floor from damage when the machine
is pushed into position or taken out
for servicing.
– The electrical socket must be
located in an accessible position
near the tumble dryer.
Please note:
Niche height Additional accessories
required
820 mm None
from Fit longer screw feet* (set to
830-840 mm approx. 40 mm)
from One raising kit*
870-885 mm
from Two raising kits*
915-930 mm
* these accessories are available to order
The tumble dryer must not be used
without the front panel in place.
If the kitchen run has a continuous
furniture plinth in place, a gap must
be made for the tumble dryer.
55