Programme End - Unload The Drum - Miele T 4859 Ci SUPERTRONIC Operating Instructions Manual

Before the end of a programme
There is a cooling down phase at the
end of the drying sequence:
"Cooling down" appears in the display.
The programme is not finished until the
cooling down phase has been
completed.

Programme end - unload the drum

Anti-crease and Finish will appear in
O
the display to indicate that the
programme has finished. The buzzer
will sound at intervals.
The dryer has an energy saving mode:
After the programme has finished, the
display will go out and the indicator
light for the Start button will start to
flash slowly (see also Display/button
allocation in the the "Settings" menu.
During the Anti-crease phase, the
drum will rotate at intervals to prevent
laundry creasing. This is quite normal.
^ Press the a button to open the
door.
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
The dryer will switch off automatically
15 minutes after the end of a
programme/the end of the anti-crease
phase.
If the dryer is signed on to the
Miele|home system, it will not switch
off automatically.
4. Programme end - unload the drum
^ Press the s button to switch the
^ Close the door.
7
^ Empty the condensed water
^ Please see "Cleaning and care" for
Drum lighting
The lighting only comes on when the
door is opened if the dryer is switched
on. It will go out after a short while if the
door is left open to save energy.
dryer off.
container unless the dryer has been
connected to an external drainage
system in which case it does not
have to be emptied.
details.
31