Using The Remote Control - Optimus STAV-3680 Owner's Manual

Using the Remote Control

SURROUND
DISC AUDIO
CD
RANDOM BEST ASMS
TAPE
DECK1 DECK2
STATION CLASS FM MONO
REAR C.MODE
CENTER TEST
LEVEL TONE
PRO 5-D SFC
LOGIC THEATER MODE MUTINTG
TAPE2
FUNCTION MONITOR LOUD
POEWR
MASTER
RECEIVER CD TAPE VOLUME
STAV-3680 AUDIO/VIDEO
SYSTEM REMOTE OSR
The remote control works up to a distance of about 23 feet, and within a 30-de-
gree angle on either side of the receiver. Point the control at the receiver's front
panel and press the desired button(s).
Many buttons on the remote control work the same as buttons on the receiver's
front panel. Use these buttons exactly as you would use the corresponding but-
tons on the receiver.
AUDIO/SURROUND Switch
Some buttons on the remote control have two functions. Set the
switch to to activate the function printed in green on the remote
ROUND AUDIO
control's panel. Set the switch to
For example, the button marked
mode adjust when you set the switch to
when you set the switch to
Receiver/Amplifier Section
+ MASTER VOLUME –
Adjusts the system's volume. See Page 14.
C. MODE
Selects among the four center mode settings with
SURROUND
TEST TONE
Sounds test tones from each speaker with
set to
– CENTER +
Controls the relative volume of the center speaker with
DIO SURROUND
– REAR +
Controls the relative volume of the rear speakers with
SURROUND
SFC MODE
Selects between Studio Effect or Arena Effect, or turns the
SFC mode off. See Page 20.
5-D THEATER Selects between 5-D Pro Logic or 5-D Surround, or turns the
5-D function off. See Page 20.
PRO LOGIC
Turns the Dolby Pro Logic Surround on and off. See Page 20.
LOUD. Boosts/cuts high and low frequency sounds at low listening
levels. See Page 15.
TAPE 2 MONITOR Switches the receiver to monitor the source connected to the
TAPE 2 MONITOR
Selects a program source (VCR/Tape 1, DVD/TV, LD/SAT,
FUNCTION
CD, tuner, or phono). Repeatedly press
display shows your desired program source. See Page 14.
RECEIVER POWER Turns the receiver on and off. See Page 14.
MUTING Silences the receiver. Press again to restore the sound to its
previous level. See Page 15.
CLASS Selects the receiver's memory class with
set to
FM MONO Selects the FM reception mode with
AUDIO
STATION Press to tune to the next higher or lower memory location
with
to use the function printed in gold.
SURROUND
and
C. MODE TEST TONE
and as the test tone function
SURROUND
.
AUDIO
set to . See Page 21.
SURROUND
. See Page 21.
AUDIO
set to . See Page 21.
AUDIO
set to . See Page 21.
SURROUND
jacks. See Page 18.
AUDIO . See Page 16.
. See Page 17.
set to
AUDIO/SURROUND AUDIO
AUDIO/SUR-
operates as the center
AUDIO
AUDIO SURROUND
AU-
AUDIO
FUNCTION until the
AUDIO/SURROUND
set to
AUDIO/SURROUND
. See Page 16.
23