Tuning The Radio - Optimus STAV-3680 Owner's Manual

Tuning the Radio

Notes:
• If you store a frequency in a memory
that already contains a frequency, you
replace the previous frequency.
• If your receiver is disconnected from
AC power for several days, it loses all
the stored frequencies.
You can tune your receiver manually or you can store stations in memory.
Manual Tuning (Front Panel Only)
Follow these steps to manually tune to a station.
1. Press . Then press
TUNER
When you select the AM or FM band, the receiver tunes to and displays
the frequency last selected in that band.
2. Press so
FREQ
SELECT
3. Turn to tune the desired station.
MULTI JOG
Notes:
• appears on the display when you tune to a strong station.
TUNED
• STEREO appears on the display when the tuner is receiving FM
broadcasts.
Memory Tuning
Memory tuning lets you instantly tune to a stored station. You can store up to 30
AM or FM frequencies in three different classes —10 frequencies in each class.
Follow these steps to store a station in a memory location.
1. Press . Then press
TUNER
2. Using manual tuning, select the station you want to store.
If desired, press
FM MONO
on Page 18). This setting is also stored in memory.
3. Press . MEMORY
MEMORY
4. While is on the display, press
MEMORY
want appears on the display, turn
you want, then press
The class and memory number flash, then light steadily.
To tune to a stored station, press
play, then turn
MULTI JOG
When you reach the last frequency in a class (frequency number 10 moving for-
ward or number 1 moving in reverse), the receiver automatically moves to the
next class of memory.
You can also use
STATION
ory. See "Using the Remote Control" on Page 23.
to select the desired band.
FM/AM
appears on the
JOG MODE
to select the desired band.
FM/AM
for FM monaural sound (see "Using FM Mono"
appears for 5 seconds.
CLASS
to select the memory number
MULTI JOG
to store the frequency in that memory.
ENTER
so ST appears on the
SELECT
until the desired frequency appears on the display.
on the remote control to select a station in mem-
Basic Operation
display.
so the class number you
JOG MODE dis-
17