Optimus STAV-3680 Owner's Manual page 10

Preparing Your Receiver
Note: If your VCR is monaural, use a Y-
adapter (available at your local Ra-
dioShack store) to connect the VCR's
audio output to both the
puts on the receiver.
10
Connecting Video Sources
If you connect three video sources such as VCRs, laser disc players, or DVD
(digital video disc) players to your receiver, you can use the receiver to select
each video source. You can also use the receiver to easily record from the video
and audio in-
L R sources to the source connected to
Connect phono cables from a VCR's audio outputs to the receiver's
or
IN
VCR/TAPE 1 OUT
Connect video cables from each video source's video outputs to the receiver's
VCR/TAPE 1 VIDEO IN
receiver's
You can connect a third video source to the
source's video output to the receiver's
dio outputs to the receiver's
Connecting a Video Monitor
The monitor (or TV with baseband video input) you connect to the
minal can monitor any source you connect to the receiver's
or
DVD/TV
MONITOR TV
IN
L
R
PHONO
AUDIO
VIDEO
OUT
OUT
VIDEO
L
IN
R
TV Monitor LD Player
(audio) jacks. Then connect phono cables from the receiver's
LD/SAT IN
(audio) jacks to the VCR's audio input jacks.
or
LD/SAT VIDEO IN
VCR/TAPE 1 VIDEO OUT
DVD/TV IN
input jacks. Connect a video cable from the receiver's
jack to the monitor's video input.
.
VCR/TAPE 1
VIDEO
TO MONITOR TV
OUT
CONTROL
IN IN OUT
OUT
IN
OUT
IN
IN PLAY REC IN IN OUT
CD TAPE2 LD/ VCR/ DVD/
MONITOR SAT TAPE 1
SIGNAL GND
VIDEO AUDIO
PLAY REC
IN L
R
OUT
PLAY REC
OUTPUT INPUT
VCR
VCR
jacks. Then connect video cables from the
jack to the VCR's video input.
jacks. Connect the
DVD/TV IN
jack, and the source's au-
DVD/TV VIDEO IN
(audio) jacks.
IN
VIDEO
IN
L
R
TV
AUDIO
VIDEO
OUT
OUT
L
R
LD Player
VCR/TAPE 1
ter-
VIDEO OUT
, ,
VCR/TAPE 1 LD/SAT
VIDEO OUT TO