Samsung Galaxy S Blaze 4G User Manual page 203

Tap Wi-Fi to activate the feature. A checkmark indicates
2.
that Wi-Fi is active. The device scans for available in-range
wireless networks and displays them under Wi-Fi networks
on the same screen.
Connecting to a Wi-Fi Network
Press
1.
Wireless and network
The network names and security settings (Open network or
Secured with WEP) of detected Wi-Fi networks display in
the Wi-Fi networks section.
Tap the network you wish to connect to.
2.
Note: When you select an open network you are automatically connected.
Enter a wireless password (if necessary).
3.
Tap Connect.
4.
and then tap (Settings)
Wi-Fi settings.
Manually Add a New Network Connection
Tap Add Wi-Fi network.
1.
Enter the Network SSID (the name of your Wireless Access
2.
Point).
Tap the Security field and select a security option. This
3.
must match the current security setting on your target
WAP.
Enter your WAP's password if the WAP is secure.
4.
Tap Save to store the new information and connect to the
5.
target WAP.
Note: No prompt to enter the WAP key displays if this is the second time to
connect to a previously accessed or secured wireless network. The
WAP key is required when the device is reset using factory default
settings.
Connections 199