Samsung Galaxy S Blaze 4G User Manual page 198

Tap Scan for devices. Your device displays a list of
3.
discovered in-range Bluetooth devices.
Tap a device from the list to initiate pairing.
4.
5. Enter the passkey or PIN code, if needed, and tap OK.
The external device must accept the connection and enter
6.
your device's PIN code.
Once successfully paired to an external device,
displays in the Status area.
Note: Due to different specifications and features of other Bluetooth-
compatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible with all
Bluetooth-compatible devices.
Disconnecting a Paired Bluetooth Device
Disconnecting a paired device breaks the connection between
the device and your phone, but retains the knowledge of the
pairing. At a later point when you wish to reconnect the device,
there is no need to setup the connection information again.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, tap the previously paired
2.
device (from the bottom of the page).
194
Tap OK to confirm disconnection.
3.
– or –
From the Bluetooth settings page, touch and hold the
name of the previously paired device, and select
Disconnect.
Note: Disconnections are manually done but often occur automatically if the
paired device goes out of range of your phone or it is powered off.
Deleting a Paired Bluetooth Device
Deleting a device from your list removes its "connection record"
and upon reconnection would require that you re-enter all the
previous pairing information.
Verify Bluetooth is active.
1.
From the Bluetooth settings page, touch and hold the
2.
name of the previously paired device (from the bottom of
the page). This opens the connected device's menu
options.
Tap Unpair to delete the paired device.
3.