Konica Minolta magicolor 1650en User Manual page 58

ETHER-
NET
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
All factory default values are shown in bold.
TCP/IP ENABLE
IPV4
Settings
YES/NO
If is selected, TCP/IP is enabled.
YES
If is selected, TCP/IP is disabled.
NO
Settings
DHCP/
BOOTP
Select whether or not the IP
address is automatically
acquired.
If
YES
is automatically acquired.
If is selected, the IP address
NO
is not automatically acquired.
Settings
IPV4
ADDRESS
Set the IPv4 address for this
printer on the network.
Use the +, ,, *, and ) keys to
specify the value.
If the IP address is manually
specified,
automatically set to
Settings
DEFAULT
ROUTER
Specify the IPv4 address of the
router if one is on the network.
Use the +, ,, *, and ) keys to
specify the value.
Settings
SUBNET
MASK
Specify the subnet mask for the
network.
Use the +, ,, *, and ) keys to
specify the value.
YES/NO
is selected, the IP address
192.168.001.002
is
DHCP/BOOTP
.
NO
000.000.000.000
000.000.000.000
4-19