Sharp lc-15b2ua Operation Manual page 9

PREPARATION
W Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent
proper operation.
Cautions regarding use of remote control
W Do not expose the remote control to shock.
In addition, do not expose the remote control to liquids, and do not place
in an area with high humidity.
W Do not install or place the remote control under direct sunlight. The heat
may cause deformation of the unit.
n The remote control may not work properly if the remote sensor window
of the main unit is under direct sunlight or strong lighting. In such a
case, change the angle of the lighting or LCD TV set, or operate the
remote control closer to the remote sensor window.
If the remote control fails to operate the LCD color TV functions, replace the batteries in the remote
control.
1
Open the battery
2 Insert batteries (two "AAA" 3 Close the battery
cover.
size
(UM/SUM-4) batteries,
cover.
supplied with product).
W Slide the cover while
pressing down.
n Place the batteries with their
terminals corresponding to
the (+) and (-) indications in
the battery compartment.
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
l
Place batteries with their terminals corresponding
to the (+) and (-) indications.
l
Different types of batteries have different characteristics. Do not mix batteries of different types.
l
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
l
Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
l
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
l
If the remote control is not used for an extended period of time, remove the batteries from the remote
control.
PREPARATION
• Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent
proper operation.
Cautions regarding use of remote control
• Do not expose the remote control to shock.
In addition, do not expose the remote control to liquids, and do not place
in an area with high humidity.
• Do not install or place the remote control under direct sunlight. The heat
may cause deformation of the unit.
• The remote control may not work properly if the remote sensor window
of the main unit is under direct sunlight or strong lighting. In such a
case, change the angle of the lighting or LCD TV set, or operate the
remote control closer to the remote sensor window.
?
•
X
! I
If the remote control fails to operate the LCD color TV functions, replace the
b~tteries
in the remote
control.
1
Open the battery
cover.
• Slide the cover while
pressing down.
2
Insert batteries (two "AAA"
size (UM/SUM-4) batteries,
supplied with product) .
• Place the batteries with their
terminals corresponding to
the (+) and (-) indications in
the battery compartment.
3
Close the battery
cover.
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
• Place batteries with their terminals corresponding to the (+) and
H
indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not used for an extended period of time, remove the batteries from the remote
control.