Betec ZB-10 Instruction Manual page 9

Display
Button
SMALL or S
M
LARGE or L
WATER
ON/OFF
Operating Instructions
Step 1
Plug in the machine into the socket.
Step 2
Open the water reservoir access door and add water as sketch A.
If your unit is ZB-10B or ZB-10C,you can add water with both sketch A and sketch B.
Sketch A
Add Water by Manual(All Three models)
Water is not enough in water reservoir, need to add water
Ice on making,
if S at right top hand of it,then means small size ice on making
if M at right bottom hand,then means middle size ice on making
if L at right bottom hand,then means large size ice on making
Unit is on ice dropping process
Ice is full
Press it to select small size ice
Press it to select middle size ice (for ZB-10A and ZB-10C only)
Press it to select large size ice
Press it to release water (for ZB-10B only)
Press it to turn on or off the unit
Explanation
Operation
Connect Unit to Water Faucet(ZB-10B & ZB-10C only)
Sketch B