Hints On Creating A User Tone; Deleting A User Tone - Optimus MD-1200 Owner's Manual

42-4041.fm Page 28 Tuesday, August 3, 1999 6:56 AM

Hints on Creating a User Tone

• Use a preset tone that is similar to
the one you are trying to create.
When you already have a general
idea of the tone you are trying to
create, it is a good idea to start with
a similar preset tone. If you want to
use a layered tone, start out with a
2DCO tone.
• Determine the
parameter. The PCM Set and Amp
Envelope Set parameters are the
major factors that determine the
overall tone characteristic. Start out
by setting these two parameters to
get the general sound you want, and
then set the other parameters to add
the finishing touches.
• Experiment with different settings.
There are no real rules about what a
tone should sound like. Let your
imagination run free and experiment
with different combinations. You
might be surprised at what you can
achieve!

Deleting a User Tone

To delete an existing user tone, follow
Steps 1–5 of "Creating and Storing a
User Tone" on Page 25. When
appears in Step 5, press
display changes to
to delete. The parameters of the
TONE
default tone for that number are re-
stored.
28
most important
SAVE ?
twice. The
Press
Delete?