Step Recording - Optimus MD-1200 Owner's Manual

42-4041.fm Page 38 Tuesday, August 3, 1999 6:56 AM
7. Press
START/STOP
ing.
This data is stored on the selected
track in addition to the notes you
played:
• tone number
• optional pedal operations
• pitch bender operations
• drum pad operations

Step Recording

1. Repeatedly press
Rec. No. appears.
2. Within 5 seconds, use
select a song number.
3. Press the desired
button ( – ) to select the track you
2 6
want to record on.
4. Change the tone, if desired.
5. Press to start recording.
STEP
6. Use the keyboard or
notes, or to enter rests.
0
• When you enter the note using
the keyboard with touch response
turned on, the key pressure is
also recorded.
• You can also enter the chords
using the keyboard.
• When you use
note, a staff on the display shows
the note you enter.
• To delete a rest entry, press
again.
38
to end record-
Notes:
until
MEMORY
or to
+ –
MEMORY TRACK
or to enter
+ –
or to enter a
+ –
0
7. Use – to enter the length of the
1 9
note or rest.
8. Repeat Steps 5 and 6 to enter more
notes.
9. Press ,
MEMORY STEP
to end recording.
STOP
• If you make a mistake, see "Correct-
ing Mistakes" on Page 37.
• When you record on a track that
already contains data, the keyboard
automatically locates the end of the
previous recording — measure,
beat, or clock ( 1 / of a beat) — and
48
appends your new entry from there.
• To record a drum pad part, play a
drum pad in Step 5.
• During recording
through 6, the entire keyboard func-
tions as a melody keyboard, regard-
less of the current
MODE
• This data is stored on the selected
track in addition to the notes you
played:
• tone number
• drum pad operations
• You can turn off a specific track dur-
ing playback by using the mixer
function (see "Using the Mixer" on
Page 22).
, or
START/
on Tracks 2
setting.