Editing Techniques And Display Contents; Deleting Individual Data; Deleting All Data In A Specific Track - Optimus MD-1200 Owner's Manual

42-4041.fm Page 40 Tuesday, August 3, 1999 6:56 AM
Editing Techniques and
Display Contents
Key Pressure (Velocity) — Use the
keyboard, number buttons, or
adjust the key pressure. To change the
key pressure using the keyboard, be
sure to turn on touch response.
Pitch — Enter a new note on the key-
board or use or to change to the next
+ –
higher or lower note. The keyboard and
the staff on the display show your new
entry.
Chord — Use the appropriate chord fin-
gering method as determined by the
setting.
MODE
Tone Number/Rhythm Number — Use
the number buttons or
Rhythm Controller (
,
FILL-IN VARIATION/FILL-IN
)/Drum Pad — Press the button
ENDING
for the function you want to change to.

Deleting Individual Data

1. Follow Steps 1–5 under "Editing
Memory Contents" on Page 39.
2. Press and at the same time.
+ –
appears.
DataDel?
3. Press to delete the selected
data.
Or press or (or
the procedure without deleting any-
thing.
40
Deleting All Data in a Specific
Track
and to
+ –
or .
+ –
,
INTRO NORMAL/
,
SYNCHRO/
Notes:
or ) to cancel
+ –
1. Press until
MEMORY
appears. Within 5 seconds, use
to select a song number.
–
2. Hold down
MEMORY
appears.
Tr.Del.?
3. Within 5 seconds, press the
number (
ORY TRACK
track(s) you want to delete.
• You can specify more than one
track by pressing more than one
button.
• To deselect a track, simply press
its button again.
The track contents indicator(s) for
the selected track flash(es).
4. To delete the data in the selected
track(s), press
goes into playback standby mode.
To exit the track deletion procedure
without changing any data, press
.
MEMORY
• You cannot change the song num-
ber after
Tr.Del.?
• You cannot select a track that does
not contain any recorded data.
Rec. No.
or
+
until
MEM-
– ) for the
2 6
. The keyboard
appears.