Setting Up The Audio Options; Using The Subtitle Language; Dolby Digital Out - Samsung DVD-V5600 User Manual

Using the Subtitle Language

1
Press the MENU button in the stop mode.
Press the
press the OK or
SETUP
DVD
VCR
PROG
FUNC
2
Press the OK or
Press the
then press the OK or
Disc Menu
Audio
Subtitle
3
Press the
required language.
Subtitle
• Select Automatic if you want the subtitle
language to be the same as the language
selected as the audio language.
• Select Others if the language you want is
not listed.
4
Press the OK button.
Note
• Some discs may not contain the language you
select as your initial language; in that case the disc
will use its original language setting.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
34 - English
or button to select DVD, then
button.
DVD Setup
Language Setup
Audio Setup
Display Setup
Parental Setup :
DivX(R) Registration
OK RETURN MENU
button again.
or button to select Subtitle,
button.
Language Setup
: English
: English
: English
OK RETURN MENU
or button to select the
Subtitle Language
Automatic
English
Français
Deutsch
Español
Italiano
Nederlands
Others
OK RETURN MENU

Setting Up the Audio Options

1
Press the MENU button in the stop mode.
Press the or button to select DVD, then
press the OK or button.
SETUP
Language Setup
Audio Setup
DVD
Display Setup
VCR
Parental Setup :
PROG
DivX(R) Registration
FUNC
OK RETURN
2
Press the or button to select Audio
Setup, then press the OK or
Audio Setup menu is displayed.

Dolby Digital Out

: PCM
MPEG-2 Digital Out : PCM
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
OK RETURN
3
Press the or button to select the
required item.
4
Press the OK or button to select the
required option.
Dolby Digital Out
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
• Bitstream: Converts to Dolby Digital Bitstream
(5.1CH).Select Bitstream when
using the Digital Audio Output.
Note
• Be sure to select the correct Digital Output or no
audio will be heard.
MPEG-2 Digital Out
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
• Bitstream: Converts to MPEG-2 Digital
Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.
DVD Setup
MENU
button. The
Audio Setup
MENU