Vcr Functions; Selecting The Colour Mode; Nicam - Samsung DVD-V5600 User Manual

V CR
V CR

Selecting the Colour Mode

Before recording or playing back a cassette,
you can select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
• When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
• When you playback an NTSC-recorded tape
on this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB. If your TV is
multi system TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press the MENU button, then press the OK
or button.
SETUP
DVD
VCR
PROG
FUNC
2
Press the
then press the OK or
The User Set menu is displayed.
SETUP
DVD
VCR
PROG
FUNC
3
Press the OK or
colour system. Auto ➝ PAL ➝ B/W
• Auto: When playing back a cassette,
the system standard is automatically
selected by the DVD-VCR.
• B/W: Black and White.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
F unctions
F unctions
Setup
Language : English
Clock
Install
User Set
Auto Power Off : Off
Screen Messages : On
RETURN MENU
OK
or button to select User Set,
button.
User Set
Colour System : Auto

NICAM

: On
IPC : On
OK RETURN MENU
button to select required
NICAM
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual (trans-
mission in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can
select the desired sound. Please refer to page 28.
1
Press the MENU button, then press the OK or
button.
SETUP
Language : English
Clock
DVD
Install
VCR
User Set
Auto Power Off : Off
PROG
Screen Messages : On
FUNC
OK RETURN
2
Press the or button to select User Set,
then Press the OK or
The User Set menu is displayed.
SETUP
Colour System : Auto
NICAM : On
DVD
IPC : On
VCR
PROG
FUNC
OK RETURN
3
Press the or button to select NICAM, then
press the OK or button to select On or Off.
• On (for NICAM mode):
Normally set at this position
• Off (for MONO mode):
Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
Setup
MENU
button.
User Set
MENU
English - 21