Analogue - Manual Tune, Broadcast System - Toshiba Z3030 series Manual

The television can be tuned-in manually using Manual tuning. For example: if the television cannot be
connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Use and to move across the screen and select any of these Manual Tune options.
z x
Programme
Programme: The number to be pressed on the remote control.
System: Specific to certain areas.
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
external source.
Programme skip:
Channel: The channel number on which a station is being broadcast.
Search: Search up and down for a signal.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 41.
Station: Station identification. Use the
To allocate a programme position on the television for a decoder and media recorder: turn the decoder on,
insert a pre-recorded film in the media recorder and press PLAY, then manually tune.
Press MENU and using
1
menu, with highlight Manual tuning, press
e
OK to select.
Language
Country
Auto tuning
Manual tuning
Antenna Amplifier
AV connection
Back
MENU EXIT
Use or to highlight the programme position
f e
2
required e.g. we suggest Prog. 0 for a media
recorder.
Manual tuning
Prog. Channel
0 C60
1 C22
2 C28
3 C25
4 C32
5 C69
Select
OK
Back
MENU
Analogue manual tune
System Colour Programme
system
means nothing has been stored or the facility to skip the channel is ON. See page 17.
f
or select the SET UP
z x
SET UP 1/2
English
UK
OK
OK
On
OK
Watch TV
Station
BBC1
BBC2
ITV
CH4
Sort
Watch TV
EXIT
Channel Search
skip
e z x
or and or buttons to enter up to seven characters.
3
4
5
6
Each signal will show on the television, if it is not
7
your media recorder, press
restart the search.
15
Manual fine Station
tuning
Press OK to select. If the programme is skipped,
Programme skip must be removed before
storing.
Manual tuning
System
0 I A C 60
Store
OK
MENU Back EXIT Watch TV
Press to select System and use
x
change if required.
Then press to select Search.
x
Press or to begin the search. The search
f e
symbol will flash.
Manual tuning
Search: Up
0 I A C 60
Store
OK
Back Watch TV
MENU EXIT
0
or to
f e
0
or again to
f e