Disassembly - JVC KD-SC601 Servise Manual

QQ
3 7 63 1515 0
3.1 Main body
3.1.1 Removing the front panel assembly
(See Fig.1)
(1) Push the detach button in the lower right part of the front
panel assembly and remove the front panel assembly.
3.1.2 Removing the bottom cover
(See Fig.2)
(1) Turn the main body up side down.
(2) Insert a screwdriver under the joints to release the two
joints a on the left side, two joints b on the right side and
joint c on the back side of the main body, then remove the
bottom cover from the main body.
CAUTION:
When releasing the joints using a screwdriver, do not damage
the main board.
TE
L 13942296513
3.1.3 Removing the front chassis assembly
(See Figs.3 and 4)
• Prior to performing the following procedures, remove the front
panel assembly and bottom cover.
(1) From the both sides of the main body, remove the two
screws A attaching the front chassis assembly. (See
Fig.3.)
(2) From the front side of the main body, remove the two
screws B attaching the front chassis assembly. (See
Fig.4.)
(3) Release the two joints d and two joints e from the both
sides of the main body, then remove the front chassis as-
sembly toward the front. (See Fig.3.)
www
.
http://www.xiaoyu163.com
DISASSEEMBLY
x ao u163
y
i
http://www.xiaoyu163.com
SECTION 3
2 9
8
Front panel assembly
Detach button
Joint a
Q Q
3 6 7 1 3 1 5
Joint a
Joint d
Joint d
co
.
B
9 4 2 8
Fig.1
Bottom cover
0 5 8 2 9 9 4 2 8
Joint c
Fig.2
A
A
Joint e
Front chassis assembly
Fig.3
Front chassis assembly
m
Fig.4
(No.MA035)1-7
9 9
Joint b
9 9
Joint b
Joint e