Check And Clean The Hydraulic Unit Shrouds - Toro 74906 Operator's Manual

1. Engine guard
2. Engine air intake screen
3. Bolt
Check and Clean the Hydraulic
Unit Shrouds
Service Interval: Before each use or daily
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Raise the seat.
4. Clean the debris and grass from the hydraulic unit
shrouds (Figure 78).
5. Lower the seat.
Figure 77
4. Fan housing
5. Screw
1. Hydraulic unit shrouds
48
Figure 78