Access To 'Service Configuration Menu - Bang & Olufsen beosound 5 Service Manual

Access to 'Service Configuration Menu'

BeoMaster 5
BeoSound 5
Note!
- Select PC in the LIST on Beo4 and press GO / select the configured soft button, eg.
PC on the screen on Beo5 and press OK.
- Press MENU 9 on Beo4 / press Menu + 9 (the '+' enables numerical soft buttons)
on the Beo5 screen.
- Press 0 0 GO on Beo4 / 0 0 OK on Beo5 ('Configuration Menu' expands).
The procedure is illutrated below:
.
GO
.
EXIT
.
GO
.
1
.
2
.
3
.
4
.
5
.
6
.
7
.
8
9 Configuration
.
0
MENU 9 (Beo4)
Menu '+' 9 (Beo5)
- Move the navigator arm
- On BeoSound 5, press:
(the menu appears on left side of the screen, containing new sub menus).
MODE
COVERS
ARTISTS
ALBUMS
TITLES
FAVOURITES
QUEUE
Highlight SETTINGS
The 'Customer Configuration Menu' or 'Service Configuration Menu' must be
activated from either BeoSound 5 or BeoMaster 5. It is not possible to activate the
menus on both BeoSound 5 and BeoMaster 5 at the same time.
Configuration
System Info
System Settings
Maintenance
Picture
0 0 GO (Beo4)
0 0 OK (Beo5)
to MODE and use the wheel
GO to activate 'Service Configuration Menu'
MODE
SOUND
SYSTEM INFO
N.MUSIC
SYSTEM SETTINGS
N.RADIO
MAINTENANCE
SETTINGS
PRODUCT INFO
NETWORK INFO
NETWORK SETTINGS
ROLES
RECOVERY
GO
Service mode 2.3
Configuration
System info
System Settings
Maintenance
Picture
Product Info
Network Info
Network Settings
Roles
Recovery
O to highlight SETTINGS.
VOLUME
BALANCE
BASS
TREBLE
LOUDNESS
SPEAKER TYPE